YISENNI cotton wall is simple and easy to use relative to other interior decoration materials.
 |
| Easy and simple DIY |
Construction steps:
The main points
of construction
1、 This product construction method is roller
painting construction,roller coated tools must be used in the special roller
brush,used other tools construction,will be difficult to achieve the due result.
2、 This product construction should be the last
link in whole decoration process when the door，window,
floor, wall corner line, air conditioning path hole and even the electrical
switches,socket all finished construction,so could construction this product.
Ready to work
1、 Bring the product inside the bag pour into the
plastic container that clean,bigger enough.
2、 According to the notes of the packing
bag,added right amount of warm water(water temperature is advisable at 20℃-40℃,then
sufficient stirred blance.
3、 Please use the running water for clean,to
avoid pollution.
4、 Mixed products used before should be place 1
hour,anticipate will reduce the bond strength of the product and the liquidity
of construction.Before use please mixing fully again to ensure mixing , no
lumps.
Roller coat
1、 Stick the mixture on the wall by hand or
plastic spatula, then wipe away with special roller rolling
uniformity(advisable thickness about1~2mm).
2、 Spray a little warm water, make up has already mixture product,roller
flat would be nice that found there are uneven or bareness walls after dried.
3、 Roller the last once,the move towards of the
roller brush must be the same direction,disorder of the roller will make this
product should be huddled texture,after the action of the light refraction,can
produce the visual effect of whole wall color is not uniform.
4、 For the internal corner and external corner of
the wall,use below be bored with child plastic scraper scratch qualitative,
with roller brush gently roller again.
Other
considerations
1、 To guarantee the consistency of metope stem
node,one house had better construction completion in the same days.
2、 Mixture the product,can be placed a long
time,usually does not happen qualitative within 48 hours.If the mix of products
not finished construction need to be used on alternate days,should cover the
wet towel of don’t rub on the mixed good product.
3、 Products after besmear need some time to
dry,shall ensure that the construction site clean,in order to avoid the dust
and rubbish sully the wall.
4、 By speeding the air through indoor,can
effectively improve the drying speed,to greatly reduce the pollution
opportunities.
5、 For construction of special occasions or
special treatment,please oral consult your dealer.
 |
| Docorate it yourself |
 |
| Choose any |
No comments:
Post a Comment